Comparative study of optical analysis methods for thin films

Three popular optical analysis methods (the transfer-matrix method, the Tinkham formula, and Beer's law) have been used for analyzing the optical spectra of thin films. While the transfer-matrix method is an accurate method, the Tinkham formula and Beer's law are approximate methods. Here we investigated the three methods using measured transmittance spectra of insulating transition-metal dichalcogenide (TMD) thin films on a quartz substrate. Three different semiconducting 2H-TMD systems (MoS₂, MoSe₂, and MoTe₂) were measured and analyzed. The optical conductivities obtained from the measured transmittance spectra using the transfer-matrix method and Tinkham formula and the absorption coefficients obtained using the transfer-matrix method and Beer's law were compared. The comparisons show some discrepancies. The reasons for the discrepancies between the results obtained via the two different methods were examined and the application limitations of the Tinkham formula and Beer's law were discussed.     

复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。     

Thin film photocatalysis for environmental remediation: A status review

This review accounts, various metal oxide and metal sulfide thin films available for photodegradation of several organic compounds. Due to difficulties in recycling and to avoid rigorous recollection of powder catalysts, the thin film catalyst are gaining rapid attention for photocatalytic applications. The semiconducting thin films are growing as promising photocatalyst for water treatment. This review focuses mainly on the photocatalytic activity of metal oxide thin films in terms of its stability, charge transport and absorption properties. Thin film photocatalyst provides the increased efficiency and cost reduction of device. Furthermore, this review summarizes some key factors regarding the enhancement in photocatalytic performance of thin films.     

Applications of Tamm plasmon-liquid crystal devices

ABSTRACT

The Tamm-plasmon-polariton (TPP) occurs at the interface between a metallic film and the photonic-crystal (PC) substrate. Unlike conventional surface-plasmon-polariton (SPP), TPP can be directly excited by both the transverse electric (TE) and transverse magnetic (TM) electromagnetic waves without using additional coupling optics. The fact that the optical functionality of most plasmonics devices is determined after fabrication limits their applications. Tunable SPP devices by applying liquid crystals (LCs) have been widely demonstrated due to their large birefringence and easy controllability via external stimuli. However, actively tuning TPP is difficult because the localised electric field is between the metallic film and PC substrate, the change of refractive index above the metallic film has only small influences on TPP. This article is intended to briefly review recent progress towards using LCs for actively tuning TPP devices. Not only TPP devices can gain benefits from LCs, we will also discuss the applications of TPP for measuring the anisotropy of the alignment films of LC devices. The sensitivity of the proposed scheme will be discussed.     

Atomic Hydrogen Induced Chemical Vapor Deposition of Silicon Oxycarbide Thin Films Derived from Diethoxymethylsilane Precursor

Amorphous silicon oxycarbide (a-SiOC:H) films produced by remote plasma RPCVD from diethoxymethylsilane (DEMS) were characterized in terms of their basic properties related to the coatings deposited using conventional plasma enhanced PECVD method. The effect of substrate temperature (T_S) on the growth rate, chemical composition, structure, and properties of resulting a-SiOC:H films is reported. Film growth is an adsorption-controlled process, wherein two mechanisms can be distinguished with a transition at about T_S=70°C. Depending on the temperature, films of different nature can be obtained, from polymer-like to highly crosslinked material with C-Si-O network. The chemical structure of a-SiOC:H films was characterized by FTIR, ¹³C and ²⁹Si solid-state NMR, and X-ray photoelectron spectroscopes. The a-SiOC:H films were also characterized in terms of their density, refractive index, surface morphology, conformality of coverage, hardness, adhesion to a substrate, and friction coefficient. The films were found to be morphologically homogeneous materials exhibiting good conformality of coverage and small surface roughness. Their refractive index exhibits anomalous effect revealing a minimum value at T_S=125°C. Due to their exceptional physical properties a-SiOC:H films produced by RPCVD from DEMS precursor seems to be useful as potential dielectric materials or coatings for various encapsulation applications.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

Tribological behaviors of DLC films in sulfuric acid and sodium hydroxide solutions

Tribological behaviors of three typical kinds of diamond-like carbon (DLC) films (a-C, a-C:Cr, and a-C:H) in sulfuric acid and sodium hydroxide solutions were investigated. The a-C film showed the lowest stable coefficients of friction (COF) in both sulfuric acid and sodium hydroxide solutions but the worst wear resistance in sulfuric acid solution. The a-C:H film showed the highest COF in sulfuric acid solution and the best wear resistance in both sulfuric acid and sodium hydroxide solutions. The a-C:Cr film exhibited superior comprehensive tribological performance in sulfuric acid solution, while in sodium hydroxide solution, high COF and very poor wear resistance was observed. What is more, friction and wear mechanism was revealed by investigating the friction-induced material evolutions on the sliding surface.     

Surface and structural analysis of epitaxial La1−xSrx (Mn1−yCoy)zO3 films

In the present study were studied the ferromagnetic La_1−xSr_x (Mn_1−yCo_y)_zO₃ (LSMCO) films with Co content y = 0 to 0.18, grown on LaAlO₃ substrates by advantageous pulsed-injection metalorganic chemical vapor deposition technique. The LSMCO films exhibit negative colossal magnetoresistance effect; therefore, they are interesting as potential material for the applications in magnetic field sensing. The changes of lattice volume in the investigated LSMCO films were monitored by X-ray diffraction measurements revealing a transition from tensile to compressive strain with increase of Co content. Additionally, from the atomic force microscopy images, the surface smoothening with increase of y was determined. Despite the reduction of the out-of-plane lattice parameter of LSMCO, the increase of lattice volume in the whole Co-doping range was observed. The X-ray photoelectron spectroscopy combined with Ar⁺ ion sputtering was used for the investigation of chemical composition of the LSMCO films and demonstrated the change and redistribution of oxidation states of Mn and Co on the surface and in the volume of the films. Regardless of the structural changes and charge distribution of Co and Mn cations, epitaxial LSMCO exhibits ferromagnetic properties and magnetoresistance values increases with augmenting Co content in the range of y = 0 to 0.18.     

Improving breakdown strength and energy storage efficiency of poly(vinylidene fluoride-co-chlorotrifluoroethylene) and polyurea blend films by double layer structure design

All-organic composites are widely used in energy storage application due to the high breakdown strength performance, but the improvement of energy storage was limited by the relatively low dielectric constant. Therefore, to satisfy the high demands of dielectric materials, energy storage properties of polymer composites should be further enhanced. In this article, poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE)) and polyurea (PUA), which are known as high dielectric ferroelectric material and linearly high energy storage efficiency material respectively, are composited through double layer (DL) casting method for the first time. The properties of DL structured composite film is contrasted with solution blending structure especially in energy storage efficiency, and the results demonstrate that DL structure design can make great use of advantages of two materials and also can avoid the influence of phase separation between P(VDF-CTFE) and PUA efficiently. Moreover, high breakdown strength (6180 kV/cm) and high energy storage efficiency (77%) of DL composites can be realized simultaneously by incorporating PUA as an insulating layer, and the mechanism is discussed in detail. This work provides an effective route to improve the energy storage properties of polymer dielectric materials and shows great application potential.